SX-T3 LEFT/RIGHT FRONT MAIN SPEAKER

THIS PRODUCT HAS BEEN DISCONTINUED DECEMBER 2016

The SX-T3 is one of RBH’s T System modular speakers. An SX-T3 is essentially an SX-T2 with an additional SX-1010N mounted above the SX-T1 for astonishing dynamic range and bass impact. Capable of producing sound pressure levels rivaling a commercial theater, the SX-T3 is not for the timid. It provides astounding sonic clarity and delivers the ultimate in performance for large-scale music and home theater systems. Another benefit of the SX-T3 is its flexibility with regards to system configuration; allowing for both full-range and LFE configurations for the SX-1010N subwoofers. As with other T System models, the SX-T1 and SX-1010N "modules" are secured together using the included T System clamping brackets. The SX-T3 is currently available in black oak with a satin front baffle.

SX-T3N: A pair of SX-T3N’s consists of two SX-T1’s, two SX-1010N’s, T System clamping brackets and feet.

SX-T3P: A pair of SX-T3P’s consists of two SX-T1’s, two SX-1010N’s, T System clamping brackets, feet, and two SA-500DSP subwoofer amplifiers (one amplifier to power each SX-1010N).

For all Signature SX Series Speakers click here.

Model Name:

SX-T3

Series:

Signature SX

System Type:

Left/Right Front Main Speaker

Frequency Response:

20Hz-20kHz (±3dB)

Sensitivity:

92dB (2.83V @ 1 Meter)

Recommended Power:

100-400 Watts

Subwoofers:

(4) 10" (254mm) Aluminum

Woofers:

(4) 6-1/2" (165mm) Aluminum Cone

Tweeters:

(3) 1" (25mm) Silk Dome

Tweeter Protection:

No

Swivel Tweeter(s):

No

Crossover Frequency:

2,500 Hz

Crossover Slope:

24dB/Octave

Impedance:

4 Ohms

Cabinet/Color:

Medium Density Fiberboard (MDF)/Standard Satin Black Oak or Sandalwood, or 30 Different Custom Veneer Finishes

Grille:

Black Fabric

Dimensions:

13" W x 91-1/2" H x 19-1/2" D

(330mm W x 2324mm H x 495mm D)

Weight:

195 lbs. (88.45 kg)

Warranty:

5 Years

SX-T1 or SX-T1/R:

Modular Loudspeaker (sold either as each or by pairs)

SX-T3N or SX-T3N/R:

Pair of SX-T1 or SX-T1/R plus two SX-1010N or SX-1010N/R

SX-T3P or SX-T3P/R:

Pair of SX-T1 or SX-T1/R plus two SX-1010N or SX-1010N/R and two SA-500DSP Subwoofer Amplifiers

SX-T3N or SX-T3N/R:

Pair of SX-T1 or SX-T1/R plus four SX-1010N or SX-1010N/R

SX-T3P or SX-T3P/R:

Pair of SX-T1 or SX-T1/R plus four SX-1010N or SX-1010N/R and two SA-500DSP Subwoofer Amplifiers

NOTE: SX-T3, SX-T3/R, SX-T3, and SX-T3/R models include braces and base feet with hardware.